H3c-technologies H3C LSWM1WCM10 Access Controller Module Uživatelský manuál stáhnout pdf (Strana 17)

Connecting the console cable

Step1 Connect the DB-9 female connector of the console cable to the serial port of the PC.

Step2 Connect the RJ-45 connector of the console cable to the console port of the access controller module or

the switch.

Setting terminal parameters

Step 1: Launch a terminal emulation program on a PC, for example, Terminal under Windows 3.1 and

HyperTerminal under Windows 95/98/NT/2000/XP.

Step 2: Set the parameters for the console terminal as follows:

• Bits per second: 9600

• Data bits: 8

• Parity: none

• Stop bits: 1

• Flow control: none

• Terminal emulation: VT100

Follow these steps to set the parameters:

1. On the PC, select Start > All Programs > Accessories > Communications > HyperTerminal. The

Connection Description dialog box appears.

Figure 8 Set up a new connection

2. Type a name, test in this example, for the new connection in the Name field and click OK. The

Connect To dialog box appears.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Žádné komentáře

H3c-technologies H3C LSWM1WCM10 Access Controller Module Uživatelský manuál Strana 17