H3c-technologies H3C S3100V2 Series Switches Uživatelský manuál stáhnout pdf (Strana 90)

Figure 25 Network diagram for static port configuration

Source

1::1/64

Router A

MLD querier

Eth1/0/1

2001::1/64

Switch A

Switch B

Switch C

Eth1/0/1

Eth1/0/2

Eth1/0/4

Host A

Receiver

Host B

Host C

Receiver

VLAN 100

Eth1/0/2

1::2/64

Configuration procedure

1. Enable IPv6 forwarding and configure IPv6 addresses

Enable IPv6 forwarding and configure an IPv6 address and prefix length for each interface according to

Figure 25.

2. Configure Router A

# Enable IPv6 multicast routing, enable IPv6 PIM-DM on each interface, and enable MLD on Ethernet

1/0/1.

<RouterA> system-view

[RouterA] multicast ipv6 routing-enable

[RouterA] interface ethernet 1/0/1

[RouterA-Ethernet1/0/1] mld enable

[RouterA-Ethernet1/0/1] pim ipv6 dm

[RouterA-Ethernet1/0/1] quit

[RouterA] interface ethernet 1/0/2

[RouterA-Ethernet1/0/2] pim ipv6 dm

[RouterA-Ethernet1/0/2] quit

3. Configure Switch A

# Enable MLD snooping globally.

<SwitchA> system-view

[SwitchA] mld-snooping

[SwitchA-mld-snooping] quit

# Create VLAN 100, assign Ethernet 1/0/1 through Ethernet 1/0/3 to this VLAN, and enable MLD

snooping in the VLAN.

[SwitchA] vlan 100

[SwitchA-vlan100] port ethernet 1/0/1 to ethernet 1/0/3

[SwitchA-vlan100] mld-snooping enable

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 110 111

Komentáře k této Příručce

Žádné komentáře

H3c-technologies H3C S3100V2 Series Switches Uživatelský manuál Strana 90

Komentáře k této Příručce

Související produkty a manuály pro Směrovače H3c-technologies H3C S3100V2 Series Switches