H3c-technologies H3C S3100V2 Series Switches Uživatelský manuál stáhnout pdf (Strana 36)

part.Connect the made connector to the grounding post of the grounding strip, and then fasten it

with a hex nut, as shown in Figure 40.

Figure 39 Make

the grounding cable connector

Figure 40 Connect the grounding cable to a grounding strip

(1) Grounding post (2) Grounding strip

(3) grounding cable (4) Hex nut

Grounding the switch with a grounding conductor buried in the

earth ground

When there is no grounding strip, but an area with exposed earth is available nearby where a

grounding conductor can be buried, you can ground the switch by burying the grounding conductor.

Follow these steps to ground the switch by burying the grounding conductor into the earth:

Step1 Connect the OT terminal of the grounding cable to the switch through the grounding screw on the switch.

Step2 Weld the yellow-green grounding cable to the grounding conductor and treat the joint for corrosion

protection.

Step3 Hammer the grounding conductor into the earth.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 68 69

Žádné komentáře

H3c-technologies H3C S3100V2 Series Switches Uživatelský manuál Strana 36