H3c-technologies H3C SR6600-X Uživatelský manuál stáhnout pdf (Strana 68)

Pinout No. A

8 Brown Brown

Table 73 Crossover cable pinouts

Pinout No. A

1 Orange/white Green/white

2 Orange Green

3 Green/white Orange/white

4 Blue Blue

5 Blue/white Blue/white

6 Green Orange

7 Brown/white Brown/white

8 Brown Brown

NOTE:

Strictly follow the pinouts in the above tables when identifyin

or makin

the two types of Ethernet cables;

otherwise, the communication quality might be affected.

Connecting an Ethernet cable

1. Connect one end of an Ethernet cable to an Ethernet port on the module and the other end to the

Ethernet port on the peer device. Because the Ethernet port of the module supports MDI/MDIX

auto-sensing, you can use a straight-through cable or crossover cable to connect the port.

2. Examine the status of the LED of the Ethernet port after power-on. For the status of the LED, see the

relevant part in this manual.

Connecting an optical interface cable

Appearance of transceiver module, optical fiber and connector

Optical interfaces need to work with SFP, SFP+, XFP, or QSFP+ transceiver modules and optical fibers

with LC-type connectors.

Figure 39 SFP transceiver module

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 84 85

Žádné komentáře

H3c-technologies H3C SR6600-X Uživatelský manuál Strana 68