H3c-technologies H3C WA2600 Series WLAN Access Points Uživatelský manuál Strana 43

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 84
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 42
6-2
Task Remarks
Configuring Data Transmission Rates Optional
Configuring Power Constraint Optional
Configuring Only Non-802.11h Channels to Be Scanned Optional
Enabling 802.11g Protection Optional
Configuring Data Transmission Rates
Configuring 802.11a/802.11b/802.11g Rates
Follow these steps to configure 802.11a/802.11b/802.11g rates:
To do… Use the command… Remarks
Enter system view
system-view
Enter WLAN RRM view
wlan rrm
Configure rates (in Mbps) for
802.11a
dot11a
{
disabled-rate
|
mandatory-rate
|
supported-rate
} rate-value
Optional
By default, mandatory rates are 6,
12, and 24; supported rates are 9,
18, 36, 48, and 54; no rates are
disabled.
Configure rates for 802.11b
dot11b
{
disabled-rate
|
mandatory-rate
|
supported-rate
} rate-value
Optional
By default, mandatory rates are 1
and 2; supported rates are 5.5 and
11; no rates are disabled.
Configure rates for 802.11g
dot11g
{
disabled-rate
|
mandatory-rate
|
supported-rate
} rate-value
Optional
By default, mandatory rates are 1,
2, 5.5 and 11; supported rates are
6, 9, 12, 18, 24, 36, 48 and 54; no
rates are disabled.
Configuring 802.11n Rates
Configuration of mandatory and supported 802.11n rates is achieved by specifying the maximum
Modulation and Coding Scheme (MCS) index. The MCS data rate table shows relations between data
rates, MCS indexes, and parameters that affect data rates. A sample MCS data rate table is shown in
Table 6-1. For the whole table, see IEEE P802.11n D2.00.
Table 6-1 MCS data rate table
Data rate (Mbps)
MCS index Modulation
800ns GI 400ns GI
0 BPSK 6.5 7.2
1 QPSK 13.0 14.4
2 QPSK 19.5 21.7
3 16-QAM 26.0 28.9
Zobrazit stránku 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Komentáře k této Příručce

Žádné komentáře