H3c-technologies H3C WA3600 Series Access Points Uživatelský manuál Strana 144

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 447
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 143
131
Figure 131 Enable DHCP
2. Enable the DHCP server on VLAN-interface 1: (This operation can be omitted because the DHCP
server is enabled on the interface by default.)
a. Click the icon of VLAN-interface 1 in the Interface Configuration field.
b. Select the Enable option for DHCP Server as shown in Figure 132.
c. Cli
ck Apply.
Figure 132 Enable the DHCP server on VLAN-interface 1
3. Configure a dynamic address pool for the DHCP server:
a. Select the Dynamic option in the Address Pool field (default setting) and click Add to enter the
page as shown in Figure 133.
b. T
o configure a dynamic address pool for the DHCP server:
Enter test for IP Pool Name.
Enter 10.1.1.0 for IP Address.
Enter 255.255.255.0 for Mask.
Enter 10 days 12 hours 0 minutes 0 seconds for Lease Duration.
Zobrazit stránku 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 446 447

Komentáře k této Příručce

Žádné komentáře