H3c-technologies H3C WX5500E Series Access Controllers Uživatelský manuál stáhnout pdf (Strana 21)

NOTE:

Keep at least a distance of 1 U (44.45 mm, or 1.75 in) between devices for proper heat dissipation.

Grounding the device

ARNING!

• Correctly connecting the device grounding cable is crucial to lightning protection and EMI protection.

• Connect the

roundin

cable to the

roundin

system in the equipment room. Do not connect it to a fire

main or lightning rod.

To ground the device:

1. Use a Phillips screwdriver to remove the grounding screw from the chassis.

2. Use the grounding screw to attach one end (with ring terminal) of the grounding cable to the

chassis.

3. Connect the other end of the grounding cable according to the grounding method you use:

{ Ground the device with a grounding strip—If a grounding strip is available at the installation

site, connect the other end of the grounding cable to the grounding strip and make sure the

grounding strip has been correctly grounded.

Figure 16 Grounding the device with a grounding strip

{

Ground the device with the rack—Connect the other end of the grounding cable to the

grounding point on the rack and make sure the rack has been correctly grounded.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 58 59

Žádné komentáře

H3c-technologies H3C WX5500E Series Access Controllers Uživatelský manuál Strana 21