H3c-technologies H3C WX5500E Series Access Controllers Uživatelský manuál Strana 50

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 254
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 49
40
Figure 37 Setting the log host
3. Configure the log host, as described in Table 12.
4. Click Apply.
Table 12 Configuration items
Item Descri
p
tion
IPv4/Domain
Set the IPv4 address or domain name of
the log host, and select the VPN instance
name of the VPN to which the flow
logging server belongs..
IMPORTANT:
You can specify up to four log hosts.
The device does not support VPN
instances.
Loghost IP/Domain
VPN instance
IPv6
Set the IPv6 address of the log host.
The device does not support IPv6
addresses.
Loghost IP
Setting buffer capacity and refresh interval
1. From the navigation tree, select Device > Syslog.
2. Click the Log Setup tab.
The syslog configuration page appears.
Zobrazit stránku 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 253 254

Komentáře k této Příručce

Žádné komentáře