H3c-technologies H3C MSR 30 Uživatelský manuál stáhnout pdf (Strana 11)

Item

MSR

30-10

MSR

30-11

MSR

30-11E

MSR

30-11F

MSR

30-16

MSR

30-20

MSR

30-40

MSR

30-60

DC input

Rated

voltage

range:

–48

VDC to

–60

VDC

Not

support

Not

support

Not

supporte

Not

support

Rated

voltage

range:

–48

VDC to

–60

VDC

Rated

voltage

range:

–48

VDC to

–60

VDC

Rated

voltage

range:

–48

VDC to

–60

VDC

PoE input Not supported

Rated voltage range: 100 VAC to 240

VAC, 50 Hz or 60 Hz

Maximum power 54 W 54 W 54 W 54 W 100 W 125 W 210 W 210 W

Operating temperature 0°C to 40°C (32°F to 104°F)

Relative humidity

(non-condensing)

5% to 90%

NOTE:

• The console port and AUX port of the MSR 30-10/30-11/30-11E/30-11F share the same physical port.

• Boot ROM stores the Bootstrap for booting the router.

• The memory is used to store the communication data between the system and the CPU when the system

is running.

• The CF card is used to store the software system and configuration file. The CF card LED blinks when the

system is reading/writing data from/to the CF card. In this case, do not remove the CF card, otherwise

hardware and software damage may occur.

• Do not unplug the USB device during USB data transmission; otherwise, data loss or even hardware

failures may occur.

• The USB interface does not support hot-swapping of USB modems from Sierra Wireless.

MSR 30-10 Router

Appearance

1. Front view

Figure 1 Front panel of an MSR 30-10

(1)

(5)(4)

(3)(2)

(1) Power LED (PWR) (2) System LED (SYS)

(3) ESM LED (4) Power switch

(5) Power receptacle

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 98 99

Komentáře k této Příručce

Žádné komentáře

H3c-technologies H3C MSR 30 Uživatelský manuál Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Směrovače H3c-technologies H3C MSR 30