H3c-technologies H3C MSR 50 Uživatelský manuál stáhnout pdf (Strana 17)

Figure 1 Network diagram

Configuration procedure

1. Configure Router A:

# Enable IPX.

<RouterA> system-view

[RouterA] ipx enable

# Enable IPX on the interface Ethernet 1/2, with the network ID being 2.

[RouterA] interface ethernet 1/2

[RouterA-Ethernet1/2] ipx network 2

# Set the packet encapsulation format on the Ethernet interface to Ethernet_II.

[RouterA-Ethernet1/2] ipx encapsulation ethernet-2

[RouterA-Ethernet1/2] quit

# Enable IPX on the interface Ethernet 1/1, with the network ID being 1000.

[RouterA] interface ethernet 1/1

[RouterA-Ethernet1/1] ipx network 1000

[RouterA-Ethernet1/1] quit

2. Configure Router B:

# Enable IPX.

<RouterB> system-view

[RouterB] ipx enable

# Enable IPX on the interface Ethernet 1/2, with the network ID being 3.

[RouterB] interface ethernet 1/2

[RouterB-Ethernet1/2] ipx network 3

# Set the packet encapsulation format on the Ethernet interface to Ethernet_SNAP.

[RouterB-Ethernet1/2] ipx encapsulation snap

[RouterB-Ethernet1/2] quit

# Enable IPX on the interface Ethernet 1/1, with the network ID being 1001.

[RouterB] interface ethernet 1/1

[RouterB-Ethernet1/1] ipx network 1001

[RouterB-Ethernet1/1] quit

# Configure a Server file service information item.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Žádné komentáře

H3c-technologies H3C MSR 50 Uživatelský manuál Strana 17