H3c-technologies H3C SecBlade NetStream Cards Uživatelský manuál stáhnout pdf (Strana 18)

You can read any command that is more complicated according to Table 1.

Undo form of a command

The undo form of a command restores the default, disables a function, or removes a configuration.

Almost all configuration commands have an undo form. For example, the info-center enable command

enables the information center, and the undo info-center enable command disables the information

center.

CLI views

CLI view description

Commands are grouped into different classes by function. To use a command, you must enter the class

view of the command.

CLI views adopt a hierarchical structure, as shown in Figure 3.

• Af

er logging in to the device, you are in user view. The prompt of user view is <device name>. In

user view, you can perform display, debugging, and file management operations, set the system

time, restart your device, and perform FTP and telnet operations.

• You can enter system view from user view. In system view, you can configure parameters such as

daylight saving time, banners, and short-cut keys.

• From system view, you can enter different function views. For example, enter interface view to

configure interface parameters, create a VLAN and enter its view, enter user interface view to

configure login user attributes, create a local user and enter local user view to configure the

password and level of the local user.

NOTE:

Enter ? in any view to display all the commands that can be executed in this view.

Figure 3 Command line views

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 348 349

Žádné komentáře

H3c-technologies H3C SecBlade NetStream Cards Uživatelský manuál Strana 18