H3c-technologies H3C WX6000 Series Access Controllers Uživatelský manuál stáhnout pdf (Strana 542)

100

101

58-4

z Configure a TFTP working directory

2) Configure the device (TFTP Client)

If the free memory space of the device is not big enough, you should delete the existing programs

before downloading new ones.

# Enter system view.

<Sysname> system-view

# Assign VLAN-interface 1 an IP address 1.1.1.1/16, making sure that the port connected to PC belongs

to the same VLAN.

[Sysname] interface vlan-interface 1

[Sysname-Vlan-interface1] ip address 1.1.1.1 255.255.0.0

[Sysname-Vlan-interface1] return

# Download an application file aaa.bin from the TFTP server. (Before that, make sure that adequate

memory is available.)

<Sysname> tftp 1.2.1.1 get aaa.bin bbb.bin

# Upload a configuration file config.cfg to the TFTP server.

<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg

# You can use the boot-loader command to specify the uploaded file as the main startup file for next

startup. Then restart the device and the startup file of the device is updated.

<Sysname> boot-loader file bbb.bin main

<Sysname> reboot

Startup files for next startup must be saved under the root directory. You can copy or move a file to

change the path of it to the root directory. For description of the corresponding command, refer to the

System Maintaining and Debugging in H3C WX6103 Access Controller Switch Interface Board

Configuration Guide.

1 2 ... 537 538 539 540 541 542 543 544 545 546 547 ... 677 678

Komentáře k této Příručce

Žádné komentáře

H3c-technologies H3C WX6000 Series Access Controllers Uživatelský manuál Strana 542

Komentáře k této Příručce

Související produkty a manuály pro Směrovače H3c-technologies H3C WX6000 Series Access Controllers