H3c-technologies H3C SecPath L1000-A Load Balancer Uživatelský manuál stáhnout pdf (Strana 43)

Figure 32 Static NAT

2. In the Static Address Mapping area, click Add to enter the Add Static Address Mapping page.

Figure 33 Adding static address mapping

3. Configure a static address mapping as described in Table 8.

4. Click Apply.

Table 8 Configuration items

Item Descri

tion

Internal VPN Instance

Specify a name of the VPN instance to which the internal IP addresses belong.

If no internal VPN instance is specified, this indicates that the internal address is

a common private network address.

Internal IP Address Enter an internal IP address for the static address mapping.

Global VPN Instance

Specify a name of the VPN instance to which the external IP addresses belong.

If no global VPN instance is specified, this option indicates that the external

address is a common public network address.

Global IP Address Enter a public IP address for the static address mapping.

Network Mask

Specify the network mask for internal and public IP addresses.

If the network mask is specified, net-to-net static NAT is implemented. If no

network mask is specified, the default mask 255.255.255.255 is used. In this

case, one-to-one static NAT is delivered.

ACL Set an ACL ID for the static NAT policy.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Žádné komentáře

H3c-technologies H3C SecPath L1000-A Load Balancer Uživatelský manuál Strana 43