H3c-technologies H3C SecPath L1000-A Load Balancer Uživatelský manuál stáhnout pdf (Strana 81)

Figure 57 Binding cables where they must be bent

• Route, bind, and attach excess cables for easy, safe maintenance activities and correct operations.

• Do not tie power cables to slide rails.

• When you connect a cable to an articulated part, for example, when you connect a grounding

cable to a cabinet door, leave enough slack in cables and make sure they are not stressed from

any movement of the part.

• Cables must be protected at points where they might rub or come in contact with sharp edges or

heated areas. Use high temperature cables near heat sources.

• Securely fasten cables and take adequate measures to prevent loose connections.

Figure 58 Securely fastening cables

(1) Flat washer (2) Spring washer (3) Nut

• Fasten heavy or rigid power cables at the connectors to relief stress.

• Do not use tapping screws to fasten the connecting terminals.

• Bind together cables that are the same type and routed in the same direction.

Table 37 lists

the cable bundling specifications.

Table 37 Tie-binding parameters

Cable bundle diameter (mm)

ace between bundles (mm)

10 80 to 150

10 to 30 150 to 200

(1)

(1)(2) (3)

(1)

(1)(2) (3)

1 2 ... 76 77 78 79 80 81 82 83 84

Žádné komentáře

H3c-technologies H3C SecPath L1000-A Load Balancer Uživatelský manuál Strana 81