H3c-technologies H3C SecPath F5000-S Firewall Uživatelský manuál stáhnout pdf (Strana 19)

1. Verify that the workbench is sturdy and well grounded.

2. Clean the recessed areas on the chassis bottom with a dry cloth.

3. Attach the four rubber feet to the recessed areas on the chassis bottom.

4. Place the firewall with upside up on the workbench.

IMPORTANT:

• Ensure good ventilation and 10 cm (3.94 in) of clearance around the chassis for heat dissipation.

• Avoid placing heavy objects on the firewall.

• Keep at least a vertical distance of 1.5 cm (0.59 in) between firewalls when they are placed one above

the other.

Figure 4 Mounting the firewall on a workbench

Installing the firewall in a standard 19-inch rack

CAUTION:

• Wear an ESD-preventive wrist strap and make sure the wrist strap makes

ood skin contact and is well

grounded before you install the firewall to the rack.

• Ensure a clearance of 1U (44.45 mm, or 1.75 in) between equipment for heat dissipation.

• A rack shelf is required to support the weight of the chassis.

• To avoid bodily injury and device damage, at least two persons are required to install the firewall.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 85 86

Žádné komentáře

H3c-technologies H3C SecPath F5000-S Firewall Uživatelský manuál Strana 19