H3c-technologies H3C SecPath F5000-S Firewall Uživatelský manuál stáhnout pdf (Strana 33)

Logging in to the firewall

• Logging in through the console port

• Logging in through Telnet

• Logging in through the Web interface

Logging in through the console port

To log in through the console port, prepare an 8-core shielded console cable (with a crimped RJ-45

connector at one end and a DB-9 female connector at the other end) and a console terminal (such as a

terminal with a standard RS232 serial port, a laptop, or a PC).

Setting up the configuration environment

To set up the configuration environment, plug the DB-9 female connector to the serial port of the console

terminal or PC, and connect the RJ-45 connector to the console port of the firewall.

When you connect a PC to a powered-on firewall, connect the DB-9 connector of the console cable to the

PC before connecting the RJ-45 connector to the firewall.

When you disconnect a PC from a powered-on firewall, disconnect the DB-9 connector of the console

cable from the PC after disconnecting the RJ-45 connector from the firewall.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 85 86

Žádné komentáře

H3c-technologies H3C SecPath F5000-S Firewall Uživatelský manuál Strana 33