H3c-technologies H3C WX5500E Series Access Controllers Uživatelský manuál stáhnout pdf (Strana 41)

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. (Optional) Configure the

MAC Information cache

queue length.

mac-address information

queue-length value

The default setting is 50.

MAC Information configuration example

Network requirements

As shown in Figure 6:

• Host A is connected to a remote server (Server) through Device.

• Enable MAC Information on GigabitEthernet 1/0/1 on Device. Device sends MAC address

changes in syslog messages to Host B through GigabitEthernet 1/0/3. Host B analyzes and

displays the syslog messages.

Figure 6 Network diagram

Configuration procedure

1. Configure Device to send syslog messages to Host B.

For more information, see Network Management and Monitoring Configuration Guide.

2. Enable MAC Information:

# Enable MAC Information globally.

<Device> system-view

[Device] mac-address information enable

# Configure MAC Information mode as syslog.

[Device] mac-address information mode syslog

# Enable MAC Information on GigabitEthernet 1/0/1.

[Device] interface gigabitethernet 1/0/1

[Device-GigabitEthernet1/0/1] mac-address information enable added

[Device-GigabitEthernet1/0/1] mac-address information enable deleted

[Device-GigabitEthernet1/0/1] quit

# Set the MAC Information queue length to 100.

[Device] mac-address information queue-length 100

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 220 221

Žádné komentáře

H3c-technologies H3C WX5500E Series Access Controllers Uživatelský manuál Strana 41